diff options
Diffstat (limited to 'target/linux/adm5120-2.6/patches')
11 files changed, 411 insertions, 0 deletions
diff --git a/target/linux/adm5120-2.6/patches/001-adm5120.patch b/target/linux/adm5120-2.6/patches/001-adm5120.patch new file mode 100644 index 000000000..70129373f --- /dev/null +++ b/target/linux/adm5120-2.6/patches/001-adm5120.patch @@ -0,0 +1,89 @@ +diff -urN linux-2.6.19.2/arch/mips/Kconfig linux-2.6.19.2.new/arch/mips/Kconfig +--- linux-2.6.19.2/arch/mips/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.new/arch/mips/Kconfig 2007-01-23 14:49:38.000000000 +0100 +@@ -12,6 +12,21 @@ + prompt "System type" + default SGI_IP22 + ++config MIPS_ADM5120 ++ bool "Support for ADM5120 SoC" ++ select SYS_HAS_CPU_MIPS32_R1 ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select GENERIC_GPIO ++ ++config PCI_ADM5120 ++ bool "Add PCI control support for ADM5120" ++ depends on MIPS_ADM5120 && PCI ++ + config MIPS_MTX1 + bool "4G Systems MTX-1 board" + select DMA_NONCOHERENT +diff -urN linux-2.6.19.2/arch/mips/Makefile linux-2.6.19.2.new/arch/mips/Makefile +--- linux-2.6.19.2/arch/mips/Makefile 2007-01-23 14:02:57.000000000 +0100 ++++ linux-2.6.19.2.new/arch/mips/Makefile 2007-01-23 14:49:39.000000000 +0100 +@@ -165,6 +165,14 @@ + load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 + + # ++# ADMtek 5120 ++# ++ ++core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/ ++cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120 ++load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000 ++ ++# + # Common Alchemy Au1x00 stuff + # + core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ +diff -urN linux-2.6.19.2/include/asm-mips/bootinfo.h linux-2.6.19.2.new/include/asm-mips/bootinfo.h +--- linux-2.6.19.2/include/asm-mips/bootinfo.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.new/include/asm-mips/bootinfo.h 2007-01-23 14:49:40.000000000 +0100 +@@ -212,6 +212,42 @@ + #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ + #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ + ++/* ++ * Valid machtype for group ADMtek ADM5120 ++ */ ++#define MACH_GROUP_ADM5120 23 ++#define MACH_ADM5120_UNKNOWN 0 /* Unknown board */ ++#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */ ++#define MACH_ADM5120_WP54G 2 /* Compex WP54G */ ++#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */ ++#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */ ++#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */ ++#define MACH_ADM5120_NP28G 6 /* Compex NP28G */ ++#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */ ++#define MACH_ADM5120_NP27G 8 /* Compex NP27G */ ++#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */ ++#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */ ++#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */ ++#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */ ++#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */ ++#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */ ++#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */ ++#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */ ++#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */ ++#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */ ++#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */ ++#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */ ++#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */ ++#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */ ++#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */ ++#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */ ++#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */ ++#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */ ++#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */ ++#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */ ++#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */ ++#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */ ++ + #define CL_SIZE COMMAND_LINE_SIZE + + const char *get_system_type(void); diff --git a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch new file mode 100644 index 000000000..503a49567 --- /dev/null +++ b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch @@ -0,0 +1,25 @@ +diff -urN linux-2.6.19.2/drivers/mtd/maps/Kconfig linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig +--- linux-2.6.19.2/drivers/mtd/maps/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig 2007-01-23 01:13:39.000000000 +0100 +@@ -622,5 +622,10 @@ + + This selection automatically selects the map_ram driver. + ++config MTD_ADM5120 ++ tristate "Map driver for ADMtek ADM5120 boards" ++ depends on MIPS_ADM5120 ++ select MTD_CFI_AMDSTD ++ + endmenu + +diff -urN linux-2.6.19.2/drivers/mtd/maps/Makefile linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile +--- linux-2.6.19.2/drivers/mtd/maps/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile 2007-01-23 01:20:52.000000000 +0100 +@@ -43,6 +43,7 @@ + obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o + obj-$(CONFIG_MTD_PCI) += pci.o + obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o ++obj-$(CONFIG_MTD_ADM5120) += adm5120_mtd.o + obj-$(CONFIG_MTD_LASAT) += lasat.o + obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o + obj-$(CONFIG_MTD_EDB7312) += edb7312.o diff --git a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch new file mode 100644 index 000000000..f6fec30bc --- /dev/null +++ b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch @@ -0,0 +1,25 @@ +diff -urN linux-2.6.19.2/drivers/net/Kconfig linux-2.6.19.2-adm5120/drivers/net/Kconfig +--- linux-2.6.19.2/drivers/net/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/net/Kconfig 2007-01-23 01:13:39.000000000 +0100 +@@ -450,6 +450,10 @@ + If you have an Alchemy Semi AU1X00 based system + say Y. Otherwise, say N. + ++config MIPS_ADM5120_ENET ++ tristate "MIPS ADM5120 Ethernet switch support" ++ depends on NET_ETHERNET && MIPS_ADM5120 ++ + config NET_SB1250_MAC + tristate "SB1250 Ethernet support" + depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC +diff -urN linux-2.6.19.2/drivers/net/Makefile linux-2.6.19.2-adm5120/drivers/net/Makefile +--- linux-2.6.19.2/drivers/net/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/net/Makefile 2007-01-23 01:13:39.000000000 +0100 +@@ -164,6 +164,7 @@ + # This is also a 82596 and should probably be merged + obj-$(CONFIG_LP486E) += lp486e.o + ++obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o + obj-$(CONFIG_ETH16I) += eth16i.o + obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o + obj-$(CONFIG_HPLANCE) += hplance.o 7990.o diff --git a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch new file mode 100644 index 000000000..6f2ef7bb3 --- /dev/null +++ b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch @@ -0,0 +1,50 @@ +diff -urN linux-2.6.19.2/drivers/serial/Kconfig linux-2.6.19.2-adm5120/drivers/serial/Kconfig +--- linux-2.6.19.2/drivers/serial/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/serial/Kconfig 2007-01-23 01:13:39.000000000 +0100 +@@ -246,6 +246,22 @@ + + comment "Non-8250 serial port support" + ++config SERIAL_ADM5120 ++ bool "ADM5120 serial port support" ++ depends on MIPS_ADM5120 ++ select SERIAL_CORE ++ select SERIAL_CORE_CONSOLE ++ help ++ Driver for the on chip UARTs on the ADM5120 SoC ++ ++config ADM5120_NR_UARTS ++ int "Maximum number of ADM5120 serial ports" ++ depends on SERIAL_ADM5120 ++ default "2" ++ ---help--- ++ Set this to the number of serial ports you want the driver to ++ support. ++ + config SERIAL_AMBA_PL010 + tristate "ARM AMBA PL010 serial port support" + depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) +diff -urN linux-2.6.19.2/drivers/serial/Makefile linux-2.6.19.2-adm5120/drivers/serial/Makefile +--- linux-2.6.19.2/drivers/serial/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/serial/Makefile 2007-01-23 01:21:45.000000000 +0100 +@@ -20,6 +20,7 @@ + obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o + obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o + obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o ++obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o + obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o + obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o + obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o +diff -urN linux-2.6.19.2/include/linux/serial_core.h linux-2.6.19.2-adm5120/include/linux/serial_core.h +--- linux-2.6.19.2/include/linux/serial_core.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/include/linux/serial_core.h 2007-01-23 01:13:39.000000000 +0100 +@@ -133,6 +133,9 @@ + #define PORT_S3C2412 73 + + ++/* ADMtek ADM5120 SoC */ ++#define PORT_ADM5120 68 ++ + #ifdef __KERNEL__ + + #include <linux/compiler.h> diff --git a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch new file mode 100644 index 000000000..40e4fbedf --- /dev/null +++ b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch @@ -0,0 +1,53 @@ +diff -urN linux-2.6.19.2/drivers/usb/core/hub.c linux-2.6.19.2-adm5120/drivers/usb/core/hub.c +--- linux-2.6.19.2/drivers/usb/core/hub.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/usb/core/hub.c 2007-01-23 01:13:39.000000000 +0100 +@@ -2156,6 +2156,8 @@ + USB_DT_DEVICE << 8, 0, + buf, GET_DESCRIPTOR_BUFSIZE, + (i ? USB_CTRL_GET_TIMEOUT : 1000)); ++printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0, ++buf->bDescriptorType, USB_DT_DEVICE); + switch (buf->bMaxPacketSize0) { + case 8: case 16: case 32: case 64: case 255: + if (buf->bDescriptorType == +diff -urN linux-2.6.19.2/drivers/usb/host/Kconfig linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig +--- linux-2.6.19.2/drivers/usb/host/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig 2007-01-23 01:13:39.000000000 +0100 +@@ -192,3 +192,6 @@ + To compile this driver as a module, choose M here: the + module will be called "sl811_cs". + ++config USB_ADM5120_HCD ++ tristate "ADM5120 HCD support" ++ depends on USB && MIPS_ADM5120 +diff -urN linux-2.6.19.2/drivers/usb/host/Makefile linux-2.6.19.2-adm5120/drivers/usb/host/Makefile +--- linux-2.6.19.2/drivers/usb/host/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/usb/host/Makefile 2007-01-23 01:13:39.000000000 +0100 +@@ -16,3 +16,4 @@ + obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o + obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o + obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o ++obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o +diff -urN linux-2.6.19.2/drivers/usb/Kconfig linux-2.6.19.2-adm5120/drivers/usb/Kconfig +--- linux-2.6.19.2/drivers/usb/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/usb/Kconfig 2007-01-23 01:13:39.000000000 +0100 +@@ -91,8 +91,6 @@ + + source "drivers/usb/net/Kconfig" + +-source "drivers/usb/mon/Kconfig" +- + comment "USB port drivers" + depends on USB + +diff -urN linux-2.6.19.2/drivers/usb/Makefile linux-2.6.19.2-adm5120/drivers/usb/Makefile +--- linux-2.6.19.2/drivers/usb/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/usb/Makefile 2007-01-23 01:22:18.000000000 +0100 +@@ -17,6 +17,7 @@ + obj-$(CONFIG_USB_U132_HCD) += host/ + obj-$(CONFIG_ETRAX_USB_HOST) += host/ + obj-$(CONFIG_USB_OHCI_AT91) += host/ ++obj-$(CONFIG_USB_ADM5120_HCD) += host/ + + obj-$(CONFIG_USB_ACM) += class/ + obj-$(CONFIG_USB_PRINTER) += class/ diff --git a/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch b/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch new file mode 100644 index 000000000..593743d7b --- /dev/null +++ b/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch @@ -0,0 +1,25 @@ +diff -urN linux-2.6.19.2/drivers/char/Kconfig linux-2.6.19.2-adm5120/drivers/char/Kconfig +--- linux-2.6.19.2/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/char/Kconfig 2007-01-23 01:13:39.000000000 +0100 +@@ -1034,7 +1034,9 @@ + The mmtimer device allows direct userspace access to the + Altix system timer. + +-source "drivers/char/tpm/Kconfig" ++config ADM5120_GPIO ++ tristate "ADM5120 GPIO" ++ depends on MIPS_ADM5120 + + config TELCLOCK + tristate "Telecom clock driver for MPBL0010 ATCA SBC" +diff -urN linux-2.6.19.2/drivers/char/Makefile linux-2.6.19.2-adm5120/drivers/char/Makefile +--- linux-2.6.19.2/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-adm5120/drivers/char/Makefile 2007-01-23 01:20:01.000000000 +0100 +@@ -90,6 +90,7 @@ + obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o + obj-$(CONFIG_TANBAC_TB0219) += tb0219.o + obj-$(CONFIG_TELCLOCK) += tlclk.o ++obj-$(CONFIG_ADM5120_GPIO) += adm5120_gpio.o + + obj-$(CONFIG_WATCHDOG) += watchdog/ + obj-$(CONFIG_MWAVE) += mwave/ diff --git a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch new file mode 100644 index 000000000..25ec59a39 --- /dev/null +++ b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch @@ -0,0 +1,20 @@ +diff -urN linux-2.6.21.1/arch/mips/pci/Makefile linux-2.6.21.1-adm5120/arch/mips/pci/Makefile +--- linux-2.6.21.1/arch/mips/pci/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.21.1-adm5120/arch/mips/pci/Makefile 2007-01-23 14:49:40.000000000 +0100 +@@ -53,3 +53,4 @@ + obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o + obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o + obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o ++obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o +--- linux-2.6.21.1.old/include/linux/pci_ids.h 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1/include/linux/pci_ids.h 2007-05-31 09:36:56.000000000 +0200 +@@ -1701,6 +1701,9 @@ + #define PCI_VENDOR_ID_ESDGMBH 0x12fe + #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 + ++#define PCI_VENDOR_ID_ADMTEK 0x1317 ++#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120 ++ + #define PCI_VENDOR_ID_SIIG 0x131f + #define PCI_SUBVENDOR_ID_SIIG 0x131f + #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 diff --git a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch new file mode 100644 index 000000000..81ec37d05 --- /dev/null +++ b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch @@ -0,0 +1,37 @@ +diff -Nur linux-2.6.19.2/drivers/mtd/Kconfig.old linux-2.6.19.2/drivers/mtd/Kconfig +--- linux-2.6.19.2/drivers/mtd/Kconfig.old 2007-03-25 08:13:02.000000000 +0200 ++++ linux-2.6.19.2/drivers/mtd/Kconfig 2007-03-26 13:37:47.000000000 +0200 +@@ -157,6 +157,22 @@ + for your particular device. It won't happen automatically. The + 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. + ++config MTD_MYLOADER_PARTS ++ tristate "MyLoader partition parsing" ++ depends on MIPS_ADM5120 && MTD_PARTITIONS ++ ---help--- ++ MyLoader is a bootloader which allows the user to define partitions ++ in flash devices, by putting a table in the second erase block ++ on the device, similar to a partition table. This table gives the ++ offsets and lengths of the user defined partitions. ++ ++ If you need code which can detect and parse these tables, and ++ register MTD 'partitions' corresponding to each image detected, ++ enable this option. ++ ++ You will still need the parsing functions to be called by the driver ++ for your particular device. It won't happen automatically. ++ + comment "User Modules And Translation Layers" + depends on MTD + +diff -Nur linux-2.6.19.2/drivers/mtd/Makefile.old linux-2.6.19.2/drivers/mtd/Makefile +--- linux-2.6.19.2/drivers/mtd/Makefile.old 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2/drivers/mtd/Makefile 2007-03-26 13:28:23.000000000 +0200 +@@ -12,6 +12,7 @@ + obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o ++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o + + # 'Users' - code which presents functionality to userspace. + obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch b/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch new file mode 100755 index 000000000..754a91e09 --- /dev/null +++ b/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch @@ -0,0 +1,31 @@ +--- linux-2.6.19.2/drivers/mtd/chips/Kconfig.old 2007-01-11 03:10:36.000000000 +0800 ++++ linux-2.6.19.2/drivers/mtd/chips/Kconfig 2007-03-29 14:43:32.000000000 +0800 +@@ -199,6 +199,14 @@ + provides support for one of those command sets, used on chips + including the AMD Am29LV320. + ++config MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT ++ bool "Force bottom boot for Macronix flash chips" ++ depends on MTD_CFI_AMDSTD ++ help ++ Some Macronix flash chips have wrong CFI info, and the driver may ++ detect the type incorrectly. Select this if the chip part number ++ ends with BTC. ++ + config MTD_CFI_STAA + tristate "Support for ST (Advanced Architecture) flash chips" + depends on MTD_GEN_PROBE +--- linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c.old 2007-03-22 16:14:56.000000000 +0800 ++++ linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c 2007-03-29 14:07:28.000000000 +0800 +@@ -320,6 +320,11 @@ + cfi_tell_features(extp); + #endif + ++#ifdef CONFIG_MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT ++ extp->TopBottom = 2; ++ bootloc = extp->TopBottom; ++#endif ++ + bootloc = extp->TopBottom; + if ((bootloc != 2) && (bootloc != 3)) { + printk(KERN_WARNING "%s: CFI does not contain boot " diff --git a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch new file mode 100644 index 000000000..23f377c90 --- /dev/null +++ b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch @@ -0,0 +1,27 @@ +diff -ur linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S +--- linux.old/arch/mips/kernel/head.S 2006-12-06 17:30:27.000000000 +0100 ++++ linux.dev/arch/mips/kernel/head.S 2006-12-06 18:34:43.000000000 +0100 +@@ -129,15 +129,20 @@ + #endif + .endm + +- + j kernel_entry + nop +- ++ nop ++ + /* + * Reserved space for exception handlers. + * Necessary for machines which link their kernels at KSEG0. ++ * Use as temporary storage for the kernel command line, so that it ++ * can be updated easily without having to relink the kernel. + */ +- .align 10 ++ ++EXPORT(_image_cmdline) ++ .ascii "CMDLINE:" ++ .align 10 + + EXPORT(stext) # used for profiling + EXPORT(_stext) diff --git a/target/linux/adm5120-2.6/patches/500-Nand.patch b/target/linux/adm5120-2.6/patches/500-Nand.patch new file mode 100644 index 000000000..05beb2024 --- /dev/null +++ b/target/linux/adm5120-2.6/patches/500-Nand.patch @@ -0,0 +1,29 @@ +diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig +index cfe288a..c528024 100644 +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -55,6 +55,12 @@ config MTD_NAND_TOTO + help + Support for NAND flash on Texas Instruments Toto platform. + ++config MTD_NAND_RB100 ++ tristate "NAND Flash device on RB100 board" ++ depends on MTD_NAND ++ help ++ Support for NAND flash on RB100 platform. ++ + config MTD_NAND_IDS + tristate + +diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile +index 4174202..2be57c1 100644 +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_NAND_IDS) += nand_ids. + + obj-$(CONFIG_MTD_NAND_SPIA) += spia.o + obj-$(CONFIG_MTD_NAND_TOTO) += toto.o ++obj-$(CONFIG_MTD_NAND_RB100) += rbmipsnand.o + obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o + obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o + obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o |